23 November 2021

6 Tips On Choosing The Right Water Filter System


Before the water from your tap reaches your home, it is possible it has gone through areas with dirt, contaminants, chemicals, and pathogens that can harm your immune system.

Because of this issue, companies such as www.filtap.com.au have stepped up by offering quality water filtration systems to keep the general public from harm. This is particularly important these days as we all aim for healthy living as well as clean surroundings. Choosing a water filter system for your home is often a daunting task, as there are many variables to consider before you can finally decide on the right one.

This article will try to help make your decision-making process easier. The following are a few tips to ensure that you get the right water filter system for your homes.

1. Water Quality

The first question to ask yourself when choosing a water filter system is what contaminants are in your water. There are various water filters in the market that specialize in filtering out different types of contaminant. Knowing what harmful substances are in your water will narrow down your decision accordingly. The most common contaminants found in water are:

  • Lead
  • Arsenic
  • Pharmaceutical waste
  • Cleaners (chlorine, ammonia)

If you are unsure of the contaminants present in your water, you can take a sample and have it tested by professionals. Alternatively, you can buy a home water testing kit and check the water yourself.

2. Water Capacity

Different filters vary in the amount of water they can filter daily at optimum levels. You will need to determine how many liters of water you consume every day. Ask yourself the following:

  • Is it for drinking water only?
  • Will it also be for cooking and cleaning?
  • Will it be used for bathroom purposes as well?

Your answers to these questions will inform you of the water capacity you consume.


3. Extra Features

Different brands will have varying additional features in their filtration system. Sometimes, the decision on which one to buy will depend on the features that are most suitable for your home.

4. Flow Rate

It is important to always check the flow rate of your taps. Installing a filtration system with a different flow rate from your faucets is a common mistake. This can cause various problems due to pressure variation.

If the filter flow rate is higher than that of the faucet’s, leakages may happen or a hose may burst. If it is lower, the system will experience frequent choking and the water pressure will be low. Pressure variations also shorten the life span of the filter cartridges.

Some filter systems work based on the maximum flow rate in your home at any given time.

For example, early morning can be considered as peak hours. There could be a toilet flushing, kitchen faucet running, and people showering at the same time. Some systems may not operate efficiently in the situations mentioned. Therefore, estimating the maximum flow rate is important before buying the correct filter that fits your specific situation. 

A method some suppliers use is asking potential buyers the number of bathrooms in their homes.

5. Whole House Point Of Entry (POE) Vs Point Of Use (POU)

There are two main systems to choose from. The POE system deals with filtration of the whole house. From the bathrooms to the laundry room and to the kitchen, it covers every outlet of the house.

POU filters, meanwhile, are placed in specific areas where you wish to use them. Typically, POE systems cost a lot more than POU filters.

6. Credibility

Always ensure that your filter system is bought from a reputable supplier, as this concerns your health and safety. Do not risk buying a shoddy filter system only to be hospitalized later because it failed to do its job.

Use suppliers that offer installation services. In most cases, self-installation will void the warranty and leave you helpless in the event of a mishap. Whenever possible, read online reviews and feedback about the supplier and manufacturer.

Another important thing to consider is if the supplier or brand of filter is approved nationally. This is an easy way to assess if the filter is up to the required standards. Buying and installing filters that don’t meet national standards may cause problems for you in the future.

Conclusion

A quality water filtration system for your home can help keep you and your family safe from contaminants. Take note of these tips when buying a water filter system that is fit for your particular needs.

17 November 2021

What To Do With Old And Broken Kitchen Appliances


Kitchen appliances are often made to last, but not perpetually. Many factors can shorten their lifespan, including improper use and frequent power fluctuations. If your oven, refrigerator, or dishwasher has recently died on you, how do you plan on getting rid of it? That’s a question most owners don’t get to think about either before or after purchase.

While it can be challenging to part with an old and faulty kitchen appliance, there are a few ways you can do to make your life easier. Let this article help you find the best solution for electronics disposal.

1. Hire Professional Rubbish Removal Services

Seeking the services of a private junk disposal company such as Dirt Cheap Rubbish Removal and similar firms near you is the easiest way to get rid of kitchen appliances and other bulky trash lying around your home.

These companies offer various services such as removing garden and yard waste or clearing construction refuse. If you have these types of trash that you need to dispose of, consider doing it alongside your kitchen appliances. All you have to do is take the photos and measurements of the items, and the contractor should be able to provide you with estimated work costs.

2. Have It Repaired

Making appliance disposal as eco-friendly as possible is necessary to prevent the release of toxic gases and chemicals that any kitchen appliance may emit while being stored. These hazardous compounds include polychlorinated biphenyls (PCBs), carbon dioxide, methane, and refrigerants. In some cases of leaking, it can produce pungent smells in the kitchen.

If the technician can still repair the appliance, have it done even if you’ve already bought a new unit. Instead of throwing it away, look for someone who may be happy to use your kitchen implement, no matter its age and refurbished condition.

3. Sell Your Appliances

After having it fixed, try to sell your appliances at low prices. Be transparent about its condition, though, to prevent problems down the road. There are online selling platforms where you can post your item. Most buyers are willing to pick up the appliance from your home. Additionally, you can organize a garage sale and offer these items to your neighbors to reduce the hassle of having the bulky item shipped elsewhere.

4. Donate To Charity

A freshly-repaired kitchen appliance can be sent to charity organizations and thrift shops so families who need it most can have access. These entities accept donations of any size, and they’re willing to pick up these items no matter the size. While the use of appliances has unfavorable environmental impacts and selling repaired units may not be the most environment-friendly option, it can be a better alternative to throwing it in landfills.

5. Sell For Parts

If the item is beyond repair, consider selling the appliance to technicians who’ll take them apart and preserve the valuable spare parts. Some repair centers are willing to pay owners who take their broken appliances to the shop. This is especially useful for machines that are no longer being manufactured. When an electronic unit breaks down and is no longer in production, an owner’s best option is to look for a similarly-built model for parts replacement.

6. Recycle And Repurpose

Besides selling for parts, larger appliances such as washing machines and refrigerators are often broken down and valuable materials such as metal are extracted for recycling. The metal is separated, melted down, and reused in manufacturing new products.


Scrap metal recycling centers may also pay you for any metal such as iron and steel that they’re able to extract from your broken appliance. In some instances, other materials such as plastic and glass are also taken out for repurposing.

7. Swap It Out 

In keeping with being green, some appliance manufacturers accept old units from owners buying a new appliance. This is highly convenient for owners who no longer have to worry about getting rid of their items. These manufacturers are trained to dispose of appliances properly and have connections with other entities that can recycle these units with reduced environmental damages.

8. Request Your Local Government For Pick Up

If you don’t want to spend too much in getting rid of your broken appliances, contact your local municipality to request waste disposal services. Agencies often have specific schedules and terms for these activities, so ask what’s expected from you and prepare small cash to pay for charges. It doesn’t hurt to ask where your appliances go after passing them on to the municipal agency.

Final Thoughts

There are many ways to dispose of broken kitchen appliances. Even if not all countries have laws for the proper disposal of bulky devices, the best route to take when disposing of machines should be to minimize environmental damage. To this end, hiring junk removal companies and other professionals are the most viable options when disposing of your bulky appliances.

12 November 2021

3 Small Items You Should Have Around the House

With COVID-19 causing all of us to spend more time at home, it's no surprise that many people are interested in what products they can buy to provide a little more entertainment or improve their quality of life. It's much easier to stay safe at home when you have activities to enjoy and feel comfortable in your environment. It can be difficult to know where to start if it's been a while since you treated yourself.

Take some time to see if there are any items that could make time spent in your home as enjoyable as possible. Finding products that give you something to look forward to in the summer or that can help you take better care of yourself is a good place to start. If you're planning a shopping trip, read on for three small items you should have around the house.

1. Ice Maker


Before the summer arrives, you may want to consider a mini ice machine that can help you out with everything from making frozen cocktails to keeping drinks nice and cold. This model can hold up to 1.5 pounds of ice and create new small- or medium-sized cubes in eight to 10 minutes. It even comes with a serving scoop, which can help you serve yourself or your guests during your next barbecue or pool party.

2. Nail Care Essentials


Most of us could do with taking better care of our nail health, but it can be hard to make time to go to the salon for regular manicures and pedicures. Fortunately, it's easier than ever to get everything you need to help brittle nails with a home manicure kit. While many of us think about our nails in the context of keeping them looking beautiful, many people don't think about the impact poor nail health can have. Taking care of unhealthy nails is the best way to avoid complications and infections.

TrySprig's nail buffer manicure and pedicure kit is one of the best on the market. Its enhanced mineral formula is designed to prevent stains and nail splitting, as well as supporting recovery from nail fungus. If you're serious about growing longer, thicker nails with a healthy shine, you should consider ordering your own kit at trysprig.com.

3. Air Purifier


Every home can benefit from purchasing an air purifier for high-traffic rooms. Not only can it help improve indoor air quality, it can also reduce the presence of many common allergens like dust and pet dander. While an air purifier alone isn't going to eliminate the presence of allergens entirely, it can make a significant difference in your quality of life at home. Other products like dehumidifiers can be useful for damp areas or rooms that can be vulnerable to mold growth.

Indoor air quality is particularly important now with the risks posed by COVID-19. The CDC has said that proper airflow and ventilation should be a part of any comprehensive plan to minimize the risk of infection indoors. This multilayered approach should also include other measures when in the presence of those outside your household or strangers, including social distancing and wearing face masks.

You have plenty of choices if you want to find quality products that can make your day-to-day life a little easier. It's smart to combine fun and function, so you can have fun and improve your overall health when you spend time at home. Particularly while we're still dealing with the effects of COVID-19, creating a safe environment is essential for any household. There are a number of ways you can treat yourself or approach the idea of investing in some new home products and address both your health and entertainment needs.

Common HVAC Issues That Are More Prevalent in Older Homes

Older homes can come with unique charm and character that can make them very attractive to home buyers. From architecture to history, older homes can contribute to the beauty and style of the neighborhood. As with most things, however, age can take a toll on the structures and systems of a house. Older roofs, plumbing, flooring, and wiring could all require additional work and attention. HVAC issues are another common problem found in older homes.

In general, the average HVAC system should last around 20 years, according to many experts. As the equipment ages, it becomes less energy-efficient and will lose the power to circulate air properly. While some of the issues involved with older homes add to the character and charm of the house, HVAC problems can be a headache.

From poor air quality and airflow to outdated equipment, several areas of an older home's HVAC system may require attention. As a result, there are several common HVAC issues that are more prevalent in older homes. Let's take a closer look at some of the HVAC problems that can come with older houses.

1. Lack of Airflow


No matter if you have lived in the home for a month or 20 years, most homeowners never think about their ductwork. The duct system in your home plays a critical role in heating and cooling your home as it is the vehicle for moving the air. Ductwork that is in good working order allows your home to be heated and cooled consistently. Like HVAC systems, however, ductwork has a lifespan and will begin to age and degrade after about 15 years. With proper maintenance and cleaning, air ducts can last a while but will develop cracks and leaks over time.

Depending on the age and condition of the ductwork, older homes could experience poor airflow due to aging materials. Clogs, leaks, and cracks could all interfere with the airflow from the HVAC system and lead to heating and cooling issues throughout the home. Homeowners living in older homes with airflow issues should have technicians inspect the ductwork to check for issues causing inefficiencies and lack of airflow.

2. Poor Indoor Air Quality


Construction and efficiency standards have evolved since the time that many older homes were built. This means that newer technologies and innovations in new homes today have much cleaner air and better airflow. Modern air conditioners help reduce humidity and allergens in the air by condensing and conditioning the air coming into the house. Many older systems just blow cool air and don't have the capabilities that the systems today have. As a result, many older homes have poor air quality.

Older systems allow more unfiltered outdoor air inside and circulate more pollen, dust, and other pollutants throughout the home. In addition, older ductwork can also harbor dust, dirt, allergens, and micro-organisms that spread through the home each time the air comes on. It will be important to check and change the air filters regularly in your older home to help mitigate some of these issues. A professional HVAC technician can also check the air quality in your older home and help you find solutions for any problems.

3. Outdated Thermostats


Another problem that older homes usually have is an outdated thermostat. Typically older thermostats have basic controls for heat, air, on, and off. These thermostats can contribute to frequent cycling, inefficient operation, and wear and tear on the HVAC system. Modern technology in programmable and smart thermostats allows for better control of settings and more reliable system performance. Newer thermostats can maximize energy efficiency.

Older houses can come with charm and history that many newer homes don't have. Along with the cool features and antique architecture, however, HVAC issues can often plague older houses. With some help from HVAC professionals, you can ensure that your home has clean, comfortable air year-round.

How is Foundation Repair Work Done in Colorado?

Foundation forms the basis and strength of any suitable construction work and hence its importance. But as it is for most things man-made, the foundation might come out faulty with time. 

Although the root causes might turn out to be either natural or man-made, the effect tends to lead to the same result, which is a failure of the building and, eventually, its collapse. 


With an estimate of 25%, homeowners in the U.S are likely to suffer foundation and structural damages in their lifetimes, with 5% enduring significant problems.

This article will detail signs of foundation problems, causes of foundation problems, the average cost of foundation repair, primary foundation repair methods, and preventions specifically in Colorado. Our company specializes in foundation repair Denver Colorado. Visit our website at https://denverfoundationrepairspecialists.com/

Signs of Foundation Problems:

The major signs of foundation problems can be categorized into two significant warning signs, the exterior and the interior.

Interior Warning Signs:

These are warning signs visible to the owner and can be observed without sophisticated equipment or gadgets. Some common interior warning signs are:

  • Cracks in floor
  • Bulginess on the floor
  • Misalignments in the doors and windows
  • Cracks in sheetrock

Exterior Warning Signs:

These signs can hardly be observed by mere eyes. They are often observed by the use of equipment and gadget invented for such purposes. Some of the standard exterior signs are:

  • Displacement in moldings
  • Cracks in bricks
  • Crack/Brokenness in the foundation
  • Rotation of walls
  • Separation around doors and windows

Are Foundation Problems Common in Colorado?

Foundation problems are becoming more common in Colorado, most rampantly in the Denver area, and these facts can be attributed to many factors.

Causes of Foundation Problems:

Foundation problems are caused by several natural and man-made factors. The reason for the vast majority of damage is usually water or natural disasters.

Some of the significant causes of foundation in Colorado, as observed over the years, can be categorized into natural and unnatural causes; Some natural causes include: earthquake compromised structures, flood compromised structures, extreme seasonal changes, storm compromised structures, and drought compromised structures

While some unnatural causes are expansive clay, plumbing leak beneath a home, improperly compacted fill soils, poor drainage.

Cost of Foundation Problems:

Not considering the actual cost of foundation problems in the sense that the building might be lost or need to be demolished, many foundation problems might need urgent repairs, which accounts for a lot of money. 

Considering the state of Colorado, the average cost of foundation repair work depends on the amount of damaged area, accessibility to the damaged area, and the method of repair

According to manta.com, after putting all these factors into consideration, the average cost for an average foundation repair job in the city of Colorado is roughly between the price range of 3,000 U. S dollars to 5,000 U. S dollars and are dependent on the following factors:

  • 5.00 to 9.00 U.S dollars per square foot material costs.
  • Average labor costs to repair house foundations in Colorado Springs, Colorado.
  • Average costs for materials and equipment for foundation repair in Colorado Springs.
  • All project costs (surface preparation, components, and machinery) and cleanup fees.

Foundation Repair Methods:

  • Piering and Underpinning

Piering, also called hydraulic jacking, is a repair method where steel posts are driven through the unstable soil. The hydraulic jack is used to raise and stabilize the foundation’s concrete slabs affected by the change in the underlying soil. 

The slabs must be raised carefully to avoid more unnecessary damage. Piers used for foundation repairs can be sub-divided into five different types, based on their shape and structure:

Helical Steel Piers: These types of piers are also called anchors. These piers are threaded into the ground to a predetermined load capacity, and the weight of the structure is transferred from the soil to the piers. 

Helical steel piers are used when conditions prevent the use of other types of piers. Helical piers are ideally used for repairing lightweights’ concrete slabs and beam foundations. They can also be used to secure new foundations.

Steel Piers: Steel piers are permanent foundation repairs solutions. They are strong and can be driven as far as 100 feet below the ground. Steel piers provide increased stability to foundations.

Pressed Concrete Piers: Pressed concrete piers are durable foundation piers driven as deep as 12ft below the ground into the foundation to achieve stability. They are used for interior, and exterior repairs and are often installed to beam houses.

Poured Concrete Piers: Poured Concrete Piers are piers driven deep, as far as 10 feet below the ground. An average of 7 to 10 days is required for a poured concrete pier to be successfully installed. Poured concrete piers make use of precast segments at installation.

Belled Concrete Piers: The bottom of the pier of a belled concrete pier has a bell shape foot designed to provide a comprehensive support area for the pier.

  • Leveling

Leveling is a method used to lift sinking or uneven concrete, also called mud jacking. Slab foundations sink when the soil beneath them shifts or collapses, and it leaves space below. The concrete is then lifted by drilling 2 holes through the concrete foundation and into the space below. A solution of natural elements, soil, and cement is injected into the space, thereby filling it. As the solution expands, the slab is then raised back to place.  

  • Crack repair

Cracks in foundations are repaired by patching the cracks and covering them with a waterproof masonry sealer. Some commonly used crack sealers are vinyl concrete, epoxies, hydraulic cement, silicone, and polyurethane. The type of crack sealer used is dependent on the severity of the crack.

Choosing the Correct Method for Foundation Repairs:

The cause of the distress must be determined before choosing the best repair method. Moldings and trim boards, mortar joints in bricks veneer, and low windows are often common signs of taking note of as distress signals. It is essential to choose not only the best but most efficient method of foundation repair method.

Conclusion:

Foundation repair work is an essential job in Colorado today as the factors causing foundation problems are becoming more rampant today. Early detection of the signs of foundation problems has proven to be life-savers in different circumstances. 

It is important to note that foundation problems usually occur over long periods and are not instantaneous, so there are few emergency cases. There are signals around your building that may or may not be foundation problems, but it’ll never kill to do routine checks. 

09 November 2021

6 Key Phases Of The Residential Design Process


Are you in the planning stages of building your dream home? If so, you need to hire an architect to turn your dream into a reality. But when working with an architect, you'll realize they often use complicated terms during the process of building your residential home. And if you're unfamiliar with the terminologies, it becomes tough to follow the conversations, leaving you hanging. This is the last thing you want to experience because it becomes hard to follow what's going on.

Fortunately, you don't need to learn all the technical vocabulary. You can start by understanding these key phases of the residential design process:

1. Pre-Design 

This is the first stage during the design process and is also referred to as the programming phase. During this phase, the architect will interact with you to know your needs, lifestyle, and personality. This interaction also helps bring up several essential details into the light such as:

  • The space that's enough for your present and future needs
  • How the space should be arranged, organized, and utilized
  • Site analysis, which entails lead testing, asbestos testing, dealing with existing buildings, and investigating any dangerous material. This also helps get a clearer picture of how the site interconnects to the people, climate, regulations, and surrounding area, which might affect the project.
  • Code or zoning analysis to know the accepted size and use of the structure to be built as certain code issues might affect the project. This is done by talking to city planning employees and going over the Zoning Summary.

Having all these in mind before even starting your construction project helps speed up the process and ensure both parties are on the same page regarding the size and terms. If you both agree, go ahead and sign a contract hiring the architect for their services. 

2. Schematic Design

This step is where the architectural company starts creating a building design concept after examining your wishes. The schematic design phase isn't so comprehensive but rather conceptual and accounts for around 15% of the architect's fees and total work. At this stage, the architectural design team begins to explore design concepts to get a general feel and look of the project. They also consult you to discuss any specific requirements and do exhaustive research to assess your property.

At this phase, the architect also finalizes their initial research on the local regulations and compliance. With this in mind, they can confidently determine the relationship between every space, location, and project size. Everything done at this step aims to come up with the size and shape of the building and some basic design. Other details that'll be delivered at this step include:

  • Building cross-section 
  • Floor plans of every level with plumbing fixtures and generic openings 
  • Typical wall section

Upon your approval, the architectural team will proceed to the next phase. 


3. Design Development Phase

It accounts for about 20% of an architect's fees and total work, which entails them working together with you to choose products such as fixtures, doors, windows, materials, and appliances, as well as interior finishes. Unlike with the schematic design, the architect will have a more updated plan with more information and greater precision when it comes to cost. This is done to give you more accurate estimates at the early design stages. 

4. Construction Documents Phase

During this phase, the architect is expected to be done with specifications and drawings, referred to as Construction Documents. It accounts for approximately 40% of an architect's work and fees, but this percentage differs from one project to another. The Construction Document phase entails preparing blueprint notes or drawings. In addition, architects and engineers finalize the technical specifications needed for construction, bidding, and applying for a permit. Examples of engineering discussed include electrical, structural, energy calculations, gas, and plumbing.  

The Construction Documents will be handed over to a contractor to be given a quote on how much the project will cost.

5. Bidding 

This phase only takes up a small percentage of the architect's fees and work, usually around 5%. Bidding involves going through different bids from various contractors hoping to get the construction project. It's best to assess these different bids alongside your architect because they can provide you with a list of approved contractors.

The architect will also help you examine the different contractor bids to compare the different costs better. They also have the experience and skill to gauge whether a contractor went through the blueprint as this is vital to ensure they hand over an accurate bid. In addition, the architect will help you issue formal clarifications to the illustrations and answer any question asked by a contractor.

6. Construction Administration 

It's the final phase when designing a residential property, and the architect's duty is now project management rather than creative design. The architect won't be physically present at the construction site at all times. However, they'll regularly pass by, and this could be monthly or weekly to ensure that the construction is being done with your design wishes in mind. They also come by whenever the contractors are considering changing the design, and the architect consults you to ensure you accept such alterations.

At this phase, the architect will confirm the billing the contractor is sending you to ensure they aren't overcharging you for their services. They're also tasked with other responsibilities such as solving any issue that arises during construction and confirming the contractor is using the correct material. Ideally, the contractor and architect should work together to solve any unforeseen issue that arises during construction. This will ensure your project runs smoothly and won't exceed the projected construction timeline.

Takeaway

Having a conversation with an architect during the construction of your residential home can become quite intimidating due to the complex terms they use. As a result, you'll mostly find yourself confused. The best way to prevent this would be to familiarize yourself with the key phases followed during the residential design process. If you’re unfamiliar with these, this guide has enlightened you to better understand what to expect during the design process.

04 November 2021

Lighting Potions: How to Effectively Choose Lighting Fixtures for Your Home

Photo by Skye Studios on Unsplash

Lighting is one of the most important basic features in a home when it comes to interior design. Excellent lighting can make a home’s atmosphere functional and appealing. However, most DIY designers often disregard its value. 

No matter how exquisitely accessorized, organized, and furnished a home is - it won’t be a fully well-decorated house unless you choose the correct lighting. Thus, proper lighting is a must to fully maximize your experience in your new home. If you want to learn more about how to choose good lighting for your home, read on below!

Types of Lighting 

Most lighting has a function, and it’s usually divided into three main classifications: task, ambient, and accent lighting. 

  • Task - This type of lighting helps you finish, as the name implies, your tasks, e.g., chopping ingredients, folding laundry, reading a book, painting, etc. 
  • Ambient - sets the mood of the room. It has a warm and soothing glow. This type of lighting can consist of chandeliers, pendant lights, or track lighting, etc. 
  • Accent - These lightings are used to feature a decorative piece in the house. These are also used in museums to highlight some paintings or art pieces. It can also be used as floor lights to show off your favorite plant in the house.  

Types of Light Bulbs

Types of lighting are different from the types of light bulbs; these two go hand-in-hand to maximize the light in your home. Here are three main classes of light bulbs:

LED 

These bulbs cost more than incandescents, but it’s way more energy-saving and cost-efficient, and it can last much longer. It can be used in any way - outdoor, indoor, accent, ambient, or task lighting. 

If you’re looking for LED lighting fixtures, consider purchasing from Vonn Lighting. They have a variety of modern to traditional state-of-the-art designs and free shipping! You can buy a mixture of outdoor and indoor lighting here in Vonn.

Incandescent 

Incandescent bulbs are among the most common bulbs you’ll see on the market; they’re in most appliances, e.g., microwave, fridge, etc. Unfortunately, they aren’t as long-lasting as LED bulbs, and they consume more energy. Luckily, they cost less than LED bulbs.

Halogen

Halogen is both budget-friendly and energy-efficient! It has a warm glow that’s almost similar to incandescent bulbs, and you can place it indoors or outdoors. However, they aren’t as durable.

Lighting Fixture Styles

Each type of lighting fixture has a different function in the look and performance of a space. 

  • Floor lamps - are considered task lighting since they are placed chiefly near a chair to read a book or beside a home office. 
  • Hanging lights  - It adds an exquisite look to a room, and it’s primarily used in living rooms, dining rooms, or kitchens. Most products are either pendant lights or chandeliers. 
  • Cabinet lights - are usually used below kitchen cabinets to make meal preparations more manageable and safer using task light.
  • Desk lamps - Another form of task lighting is desk lamps. It is placed on a desk to make it easier to read, study, or work. The head can be easily adjustable at any angle that makes you comfortable.
  • Wall sconces - You can place them on each side of your bed or light a dim hallway. It can be considered ambient or task lighting.

Lighting for Each Space

  • Living Room - The lighting can be layered using ambient and task lighting; so that the mood is set in a room where people relax, and you can read or watch and unwind.
  • Bedroom - A bedroom is where one rests, so the color temperature of the light should be warm to encourage rest.
  • Kitchen - LED bulbs would be best to use in this area. Also, consider incorporating dimmable lights to set the proper mood when cooking and pendant lighting and under the cabinet lighting. 

Takeaway

Always remember that lighting can either generate or destroy the ambiance in the room. It is the main element that gives a well-decorated room that unique spice! If you’re unsure how to incorporate the different styles to create a mood in the room, consider hiring a lighting designer to relieve you of your troubles.