14 November 2017

How to build a brick wall

via

Brick laying is a skill that you can easily learn provided you are a self-builder and keen to build (or fix) the brick wall in your home. In order to achieve best results, you need to lay quality bricks. You may want to hire an experienced tradesman for the quality results, that may be a cost effective option too. While building a wall or repointing brick, the mortar you use should be of good quality because it helps in maintaining the wall over the years.

As mentioned in the beginning, if you want to get involved in the bricklaying project yourself, you need to practice this skill and the best way to practice is to start with building a wall in your garden. Although it seems easy, but the most experienced DIY will need to practice it first. before you get start with the project consider following requirements. Consider the type of the brick, standard size is recommended, you can consult this chart to get the right type of brick.

1. Layout the Bricks:
When you have prepared the grounds, and necessary foundation is prepared, lay out the bricks at both ends of the wall. With the help of the string line, make a straight line at brick height between the two outside bricks.

2. Mix Sand and Cement:
Accumulate five shovels of sand and one of cement on a board or any surface. With the help of shovel, mix it to make it a consistent color. make the mixture hollow from the center, pour water and mix it well. repeat until it turns into a smooth creamy texture or paste, but not runny mixture.

3. Lay Mortar:
Along the string line, lay 1 to 2 cm mortar bed. Lay first brick, while starting at one end, and tap over it to settle it on the mortar. Apply the mortar paste at one end of the next brick, and place it next to the first brick and attach both of the bricks. Repeat the procedure along with the string line to keep it straight.

4. Place the brick side-on where the pillar starts:
Determine where you want the pillars to start. At that point, place the bricks side-on and to the end of the wall. As you build up the wall, each consecutive course of bricks should be laid in the opposite direction.

5. Lay half-bricks: 
During the process, at certain points, you will need to place half-bricks. In order to split the bricks, place the bricks on its side, place bolster on the split point and strike the head firmly with the hammer and split cleanly at the first stroke.

6. Build one course higher:
It is important to remember that you build at least one course higher on the pillars. As you build the wall, move the string line up. Each brick must be placed over the center of the beneath one.

7. Mortar Joints:
The mortar layer as joints between the bricks, should be thick. Vertical mortar joints should be10mm thick; with the standard size make sure it is 75mm thick.

8. Attractive Soldier Course for wall:
To make the walls attractive, adding a solder course on the top of the wall is a great idea. To achieve that course, place the bricks vertically lengthways. A second higher string line will be required for the uniform look.

9. Finish the beds:
In order to remove the excess mortar in beds, scrape the mortar into joints with the rounded edge of the brick jointer. Remember, start finishing with the horizontal lines and follow with the vertical ones.

No comments:

Post a Comment

Talk to me!

Related Posts with Thumbnails